Sindoh A611dn Bedienungsanleitung PDF herunterladen (Seite 42)

Printer Installation

2-18

8. Printer Setting Check

Turning on the printer

Connect the end of the power cord to the port on the back of the printer and plug the power cord to

the properly grounded wall outlet.

Switch on the printer.

When initial warming-up is complete, the message [Ready] will appear to indicate the printer is ready

to receive data.

If the message other than [Ready] appears, see 「Understanding Printer Messages」 p. 3-14.

Check your PC and see if other devices are on.

Move on to the next step.

Caution

- Leaving the printer with power switched off for a long time may result in abnormal images.

Printing the System Report Page

Print the system report to see initial settings and check if options are properly installed.

Check if the printer is on.

2. Press 【MENU】 to enter [Menu].

3. Press 【▼】 to find [Report]. Then press 【OK】.

Check whether [System Report] has been selected. Then press [OK].

If options are not displayed, switch off the device, unplug the power cord, and then install options again.

Check the tray and paper type.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 125 126

Keine Kommentare

Sindoh A611dn Bedienungsanleitung Seite 42